Overhead Line Hardware for Power Transmission Lines

A wide choice of coupling, contact, protective, connecting, spiral, supporting and tensioning hardware for power transmission lines, as well as overhead line hardware for high-voltage lines and overhead lines with shielded wires, and tools to mount high-voltage lines with self-supporting insulated wires.

Category:

Overhead Line Hardware for Power Transmission Lines

  • Hardware for power transmission lines. Coupling hardware
  • Hardware for power transmission lines. Contact hardware
  • Hardware for power transmission lines. Protective hardware
  • Hardware for power transmission lines. Connecting hardware
  • Hardware for power transmission lines. Supporting hardware
  • Hardware for power transmission lines. Tensioning hardware
  • Hardware with self-supporting insulated wires. Tools to mount high-voltage lines with self-supporting insulated wires
  • Hardware with self-supporting insulated wires. Overhead line hardware for 6-35 kV high-voltage lines with shielded wires
  • Hardware with self-supporting insulated wires. Overhead line hardware for 0.4 kV high-voltage lines 0,4 with self-supporting insulated wires

Our company provides a wide range of hardware for power transmission lines produced by well-known and trustworthy Russian hardware and insulating plants and electrotechnical plants. Made from high-strength metals, hardware products ensure the normal operation of an overhead transmission line, a distribution station or a substation during the entire operational period.

Hardware for power transmission lines includes the following types of products:

  • nodes, clamps, ears, straps, rocker arms and intermediate links that make up garlands of insulators and used to attach devices to power transmission lines;
  • clips, bunches, spacers and other elements for connecting and installing wires;
  • protective horns, rings, shields and arresters leveling mechanical loads and preventing any damage to the wires due to sudden gusts of wind or lightning discharges;
  • spiral elements for fixing ground wires, self-supporting and phase conductors;
  • pins and hooks for fixing the pin insulators.

The proposed line hardware for power transmission lines fully meet the applicable technical standards. It:

  • shows a high level of mechanical strength;
  • persistently resists the effects of oxidants and corrosion;
  • has a hinging capacity of the required level;
  • is characterized by increased fatigue strength;
  • has good electrical conductivity (for some types of hardware).

Leave a Reply

Your email address will not be published. Required fields are marked *